FlowCon FH Actuator 24V electric modulating, 2-position/3-point floating
£254.00
FlowCon FH Actuator 24V electric modulating, 2-position/3-point floating
âš¡ Electrical Calculator
🔌 Cable Size Reference
🌬 Unit Converter
🔋 Transformer VA & MCB Calculator
📊 Reference Guide
| Current (A) | Cable Size (mm²) |
|---|---|
| 6 | 1 |
| 6-12 | 1.5 |
| 12-25 | 2.5 |
| 25-32 | 4 |
| 32-40 | 6 |
| 40-64 | 10 |
| You must consider Ambient Temperature, Location and Thermal insulation in contact with cable. | |
Description
FlowCon FH Actuator Range released – Electrical Actuators with Feedback Signal for FlowCon Green.3 Valve Range
FlowCon has now released the 24V modulating actuator (FH.0.2) and the 24V 2-position or 3-point floating actuator (FH.0.4) suitable for the FlowCon Green. 3 valve range.
- FlowCon FH.0.2 – 24V 0(2)-10V modulating actuator
- FlowCon FH.0.4 – 24V Digital, 2-position or 3-point floating actuator (this page)
The FlowCon FH actuator series are especially developed to provide optimal performance in conjunction with FlowCon Green.3 valve range.
The FH actuator range, though offering a higher close-off pressure, is built on the well-known, proven FN actuator range and offers similar functionality.
Key features are as follows:
- Automatic calibration
- Feedback signal (FH.0.2 only)
- Possibility of setting control signal via DIP switches 0(2)-10V (FH.0.2 only)
- Position indicator
- Manual override
- Click on/click off function
Please note that the new FlowCon FH actuator range will be suitable for the FlowCon Green. 3 range only, despite holding a similar design to the currently available FN range.
FlowCon FH Actuator for FlowCon Green
- For FlowCon Green.3
- Electrical actuators, 24V
- 0(2)-10V modulating, 3-point floating or 2-position
- Standard with feedback
- Standard with override
- Settable control characteristics (linear control or equal percentage control)
- Settable control direction (NO/NC)
- Optional failsafe (NO/NC)
- Optional bus, BACnet or Modbus
- Auto cycle available
- Position indicator
- IP54, 360º
FlowCon FH Actuator for FlowCon FIT-G
- For FlowCon FIT-G DN40-50 (1 1/2″-2″)
- Electrical actuators, 24V
- 2-10V modulating input
- 2-10V feedback
- Standard with override
- Linear control characteristics
- Settable control direction (NO/NC)
- Optional failsafe (NO/NC)
- Auto cycle available
- Position indicator
- IP54, 360º
The Actuator is compatible with the following inserts in the Green
PICVs:
- Green.3
FlowCon_Actuator_Selection_Matrix
Additional information
| Weight | 0.35 kg |
|---|---|
| Dimensions | 8.65 × 4.35 × 8 cm |
