HVAC Products

Shop

  • Lighting Control

    Inside Light Sensor Multi-Ranging Lux 4-20mA Output

    £126.00 Exc. VAT Add to cart

    These light-intensity sensors measure light levels and are used to control luminaires, lighting systems, Venetian blinds, and canvas blinds, etc. Applications in monitoring lighting conditions at workplaces, in greenhouses, storage halls, workshops and corridors, in outdoor areas, in industrial halls, in offices, in residential and business facilities. It is used for daylight-dependent constant light control, as a light-intensity or twilight sensor, and to control sunshade equipment, avoiding unnecessary heating of rooms.

  • Lighting Control

    Inside Light Sensor Multi-Ranging Lux 0/10Vdc Output

    £126.00 Exc. VAT Add to cart

    These light-intensity sensors measure light levels and are used to control luminaires, lighting systems, Venetian blinds, and canvas blinds, etc. Applications in monitoring lighting conditions at workplaces, in greenhouses, storage halls, workshops and corridors, in outdoor areas, in industrial halls, in offices, in residential and business facilities. It is used for daylight-dependent constant light control, as a light-intensity or twilight sensor, and to control sunshade equipment, avoiding unnecessary heating of rooms.

  • Lighting Control

    Ceiling Occupancy Detector 12/24 Volt AC/DC VFC

    £91.00 Exc. VAT Add to cart

    A series of presence detector switches is designed to provide automatic control of lighting, heating or ventilation loads. They detect movement with a PIR sensor and turn on the load. When an area is no longer occupied, the load will switch off after an adjustable time-out period.

  • Lighting Control

    Ceiling Occupancy Detector 230 Volt VFC

    £91.00 Exc. VAT Add to cart

    A series of presence detector switches is designed to provide automatic control of lighting, heating or ventilation loads. They detect movement with a PIR sensor and turn on the load. When an area is no longer occupied, the load will switch off after an adjustable time-out period.

  • Humidity Sensors

    Duct Humidity 2% & Temperature Sensor, selectable output

    £121.00 Exc. VAT Add to cart

    This type of humidity and temperature sensor uses state-of-the-art single-chip multi-sensor technology. The sensing element is a polymer sensing chip with built-in electronics to give an accurate signal and a fast response. This product has been designed with state-of-the-art electronics and built in the UK to ensure excellent reliability and quality.

  • Controllers

    iSMA-B-MAC36NL-100

    £1,446.00 Exc. VAT Add to cart

    iSMA-B-MAC36NL is a compact Master Application Controller with built-in different types of I/O and operating in the Niagara Framework environment. Using the specific local I/O set 16x UI, 8x AO, 4x DI and 8x DO allows the use of the device in different applications. The controller provides control, data logging, alarming, scheduling, integration and visualisation.

  • FCU Controllers

    iSMA-RAC18-IP

    £390.00 Exc. VAT Add to cart

    The RAC18-IP controller has a built-in nano EDGE ENGINE. This cutting-edge software allows the construction of multiple applications and provides a set of libraries and components tailored to create cycle-driven user applications. This solution provides an automatic BACnet exposure and real-time programming.

  • FCU Controllers

    iSMA-B-FCU-LL

    £196.00 Exc. VAT Add to cart

    The iSMA FCU-LL, a fully programmable controller, is built to control the FCU (Fan Coil Unit). Configurable and freely programmable, powered by the Sedona Framework controller for fan coil units with Modbus or BACnet communication. Equipped with onboard 18 I/Os, adapted to be supplied with 24 V AC voltage and 24 V AC triac control.

  • FCU Controllers

    iSMA-B-FCU-HL

    £207.00 Exc. VAT Add to cart

    The iSMA FCU-HL, a fully programmable controller, is built to control the FCU (Fan Coil Unit). The controller is factory-equipped with the two most popular open communication protocols, Modbus ASCII/RTU and BACnet MSTP, which are selected using DIP switches.

  • MCBs Curve D

    Three Pole Miniature Circuit Breaker 63A, Curve D

    £14.00 Exc. VAT Add to cart

    A range of miniature circuit breakers suitable for 230/400Vac, 50/60Hz rated circuits up to 63 amps. They protect against overload and short circuits in electrical circuits and equipment in household and commercial applications. They can also be used for non-frequent changeover of electrical circuits.

  • MCBs Curve C

    Three Pole Miniature Circuit Breaker 63A, Curve C

    £14.00 Exc. VAT Add to cart

    A range of miniature circuit breakers suitable for 230/400Vac, 50/60Hz rated circuits up to 63 amps. They protect against overload and short circuits in electrical circuits and equipment in household and commercial applications. They can also be used for non-frequent changeover of electrical circuits.

  • MCBs Curve D

    Three Pole Miniature Circuit Breaker 50A, Curve D

    £14.00 Exc. VAT Add to cart

    A range of miniature circuit breakers suitable for 230/400Vac, 50/60Hz rated circuits up to 63 amps. They protect against overload and short circuits in electrical circuits and equipment in household and commercial applications. They can also be used for non-frequent changeover of electrical circuits.

  • MCBs Curve C

    Three Pole Miniature Circuit Breaker 50A, Curve C

    £14.00 Exc. VAT Add to cart

    A range of miniature circuit breakers suitable for 230/400Vac, 50/60Hz rated circuits up to 63 amps. They protect against overload and short circuits in electrical circuits and equipment in household and commercial applications. They can also be used for non-frequent changeover of electrical circuits.

  • MCBs Curve D

    Three Pole Miniature Circuit Breaker 40A, Curve D

    £14.00 Exc. VAT Add to cart

    A range of miniature circuit breakers suitable for 230/400Vac, 50/60Hz rated circuits up to 63 amps. They protect against overload and short circuits in electrical circuits and equipment in household and commercial applications. They can also be used for non-frequent changeover of electrical circuits.

  • MCBs Curve C

    Three Pole Miniature Circuit Breaker 25A, Curve C

    £14.00 Exc. VAT Add to cart

    A range of miniature circuit breakers suitable for 230/400Vac, 50/60Hz rated circuits up to 63 amps. They protect against overload and short circuits in electrical circuits and equipment in household and commercial applications. They can also be used for non-frequent changeover of electrical circuits.

  • MCBs Curve D

    Three Pole Miniature Circuit Breaker 20A, Curve D

    £14.00 Exc. VAT Add to cart

    A range of miniature circuit breakers suitable for 230/400Vac, 50/60Hz rated circuits up to 63 amps. They protect against overload and short circuits in electrical circuits and equipment in household and commercial applications. They can also be used for non-frequent changeover of electrical circuits.

Categories
Scroll to Top