Shop
-
Water Meters
125mm Flanged Cold Water Meter with Pulsed Output
£819.00 Add to basketThis range of water meters is designed to measure the volume of water flowing through a pipeline and is provided with a Reed Switch Pulse that can be connected to remote reading systems.
-
Water Meters
100mm Flanged Cold Water Meter with Pulsed Output
£645.75 Add to basketThis range of water meters is designed to measure the volume of water flowing through a pipeline and is provided with a Reed Switch Pulse that can be connected to remote reading systems.
-
Gas Valves
CPI Switch 5″ DN125 – 6″ DN150
£115.00 Add to basketThe Closed Position Indicator (CPI) switch is a mechanically activated micro-switch for monitoring the position of the gas valve. The unit is a mechanically activated switch for monitoring the position of the valve plate. When the valve is closed, the plate contacts the valve seat. The switch rod is pushed, and the electric contact is switched in configuration 1-3. When the valve opens, the plate leaves the seat and frees the rod, so that the contact switches in configuration 1-2, under the action of a return spring. Norm EN 161 specifies that the switch must commute when the plate is within 1mm of its closed position, so the CPI is used to detect the closed status, not the completely open status.
-
Gas Valves
CPI Switch 4″ DN100
£115.00 Add to basketThe Closed Position Indicator (CPI) switch is a mechanically activated micro-switch for monitoring the position of the gas valve. The unit is a mechanically activated switch for monitoring the position of the valve plate. When the valve is closed, the plate contacts the valve seat. The switch rod is pushed, and the electric contact is switched in configuration 1-3. When the valve opens, the plate leaves the seat and frees the rod, so that the contact switches in configuration 1-2, under the action of a return spring. Norm EN 161 specifies that the switch must commute when the plate is within 1mm of its closed position, so the CPI is used to detect the closed status, not the completely open status.
-
Gas Valves
CPI Switch 2 1/2″ DN65 to 3″ DN80
£115.00 Add to basketThe Closed Position Indicator (CPI) switch is a mechanically activated micro-switch for monitoring the position of the gas valve. The unit is a mechanically activated switch for monitoring the position of the valve plate. When the valve is closed, the plate contacts the valve seat. The switch rod is pushed, and the electric contact is switched in configuration 1-3. When the valve opens, the plate leaves the seat and frees the rod, so that the contact switches in configuration 1-2, under the action of a return spring. Norm EN 161 specifies that the switch must commute when the plate is within 1mm of its closed position, so the CPI is used to detect the closed status, not the completely open status.
-
Gas Valves
CPI Switch 2″ DN50
£115.00 Add to basketThe Closed Position Indicator (CPI) switch is a mechanically activated micro-switch for monitoring the position of the gas valve. The unit is a mechanically activated switch for monitoring the position of the valve plate. When the valve is closed, the plate contacts the valve seat. The switch rod is pushed, and the electric contact is switched in configuration 1-3. When the valve opens, the plate leaves the seat and frees the rod, so that the contact switches in configuration 1-2, under the action of a return spring. Norm EN 161 specifies that the switch must commute when the plate is within 1mm of its closed position, so the CPI is used to detect the closed status, not the completely open status.
-
Gas Valves
CPI Switch 1 1/4″ DN32 to 1 1/2″ DN40
£115.00 Add to basketThe Closed Position Indicator (CPI) switch is a mechanically activated micro-switch for monitoring the position of the gas valve. The unit is a mechanically activated switch for monitoring the position of the valve plate. When the valve is closed, the plate contacts the valve seat. The switch rod is pushed, and the electric contact is switched in configuration 1-3. When the valve opens, the plate leaves the seat and frees the rod, so that the contact switches in configuration 1-2, under the action of a return spring. Norm EN 161 specifies that the switch must commute when the plate is within 1mm of its closed position, so the CPI is used to detect the closed status, not the completely open status.
-
Gas Valves
CPI Switch 1″ DN25
£115.00 Add to basketThe Closed Position Indicator (CPI) switch is a mechanically activated micro-switch for monitoring the position of the gas valve. The unit is a mechanically activated switch for monitoring the position of the valve plate. When the valve is closed, the plate contacts the valve seat. The switch rod is pushed, and the electric contact is switched in configuration 1-3. When the valve opens, the plate leaves the seat and frees the rod, so that the contact switches in configuration 1-2, under the action of a return spring. Norm EN 161 specifies that the switch must commute when the plate is within 1mm of its closed position, so the CPI is used to detect the closed status, not the completely open status.
-
Gas Valves
Gas Valve Auto Reset Screwed 1″ DN25
£150.00 Add to basketGas-interception, normally closed solenoid valves that open when the coil is energised and close when there is no pressure. A pressure switch, a thermostat, etc., can control these solenoid valves. They can be equipped with a flow regulator and an adjustable slow-opening kit.
-
Gas Valves
CPI Switch 1/2″ DN15 to 3/4″ DN20
£115.00 Add to basketThe Closed Position Indicator (CPI) switch is a mechanically activated micro-switch for monitoring the position of the gas valve. The unit is a mechanically activated switch for monitoring the position of the valve plate. When the valve is closed, the plate contacts the valve seat. The switch rod is pushed, and the electric contact is switched in configuration 1-3. When the valve opens, the plate leaves the seat and frees the rod, so that the contact switches in configuration 1-2, under the action of a return spring. Norm EN 161 specifies that the switch must commute when the plate is within 1mm of its closed position, so the CPI is used to detect the closed status, not the completely open status.
-
Gas Valves
Gas Valve Auto Reset Flanged 6″ DN150
£2,670.00 Add to basketGas-interception, normally closed solenoid valves that open when the coil is energised and close when there is no pressure. A pressure switch, a thermostat, etc., can control these solenoid valves. They can be equipped with a flow regulator and an adjustable slow-opening kit.
-
Gas Valves
Gas Valve Auto Reset Flanged 5″ DN125
£2,650.00 Add to basketGas-interception, normally closed solenoid valves that open when the coil is energised and close when there is no pressure. A pressure switch, a thermostat, etc., can control these solenoid valves. They can be equipped with a flow regulator and an adjustable slow-opening kit.
-
Gas Valves
Gas Valve Auto Reset Flanged 4″ DN100
£1,102.50 Add to basketGas-interception, normally closed solenoid valves that open when the coil is energised and close when there is no pressure. A pressure switch, a thermostat, etc., can control these solenoid valves. They can be equipped with a flow regulator and an adjustable slow-opening kit.
-
Gas Valves
Gas Valve Auto Reset Flanged 3″ DN80
£656.25 Add to basketGas-interception, normally closed solenoid valves that open when the coil is energised and close when there is no pressure. A pressure switch, a thermostat, etc., can control these solenoid valves. They can be equipped with a flow regulator and an adjustable slow-opening kit.
-
Gas Valves
Gas Valve Auto Reset Flanged 2 1/2″ DN65
£630.00 Add to basketGas-interception, normally closed solenoid valves that open when the coil is energised and close when there is no pressure. A pressure switch, a thermostat, etc., can control these solenoid valves. They can be equipped with a flow regulator and an adjustable slow-opening kit.
-
Gas Valves
Gas Valve Auto Reset Screwed 2″ DN50
£230.00 Add to basketGas-interception, normally closed solenoid valves that open when the coil is energised and close when there is no pressure. A pressure switch, a thermostat, etc., can control these solenoid valves. They can be equipped with a flow regulator and an adjustable slow-opening kit.
