Shop
Showing 593–608 of 774 resultsSorted by popularity
-
Emergency Lighting
5 X Cool White DC 3V COB (Chips on Board) Lamp LED Panel Light – Rear terminals
£10.00Original price was: £10.00.£7.50Current price is: £7.50. Exc. VAT Add to cart5 X Cool White DC 3V COB (Chips on Board)
-
Current Devices
Solid Core and Split Core Current Sensors, 0–100, 0-200, 0-250 A, average output with 0-10VDC or 4-20-mA
£69.30 – £82.50Price range: £69.30 through £82.50 Exc. VAT Select options This product has multiple variants. The options may be chosen on the product pageThe CTA (Current Output – 4-20mA) /CTV (Voltage Output 0-10VDC) Series current sensors monitor the current flowing to electrical equipment or buildings.
-
Current Devices
Solid Core and Split Core Current Sensors, 0-10, 0-20, 0-50, 0–100, 0-150, 0-200 A, output 0-10VDC or 4-20-mA
£41.20 – £73.00Price range: £41.20 through £73.00 Exc. VAT Select options This product has multiple variants. The options may be chosen on the product pageThe CS series current sensors monitor the current flowing to electrical equipment or buildings. The magnitude of this current is then converted into a linear  4-20mA or 0 to 10 VDC output signal, which can be monitored by a Building Management System.
-
Current Devices
Current Monitoring Relay
£35.00 Exc. VAT Add to cartThe Current Monitoring Relay is designed to monitor Current to equipment and can be set to switch the volt free contact at a set current, also there is an adjustable time delay to eliminate current peaks. It can also be used with a current transformer to monitor higher currents. It has an LED indication and is Din-rail mounting.
-
Current Devices
CSW Solid Core and Split Core Current Switches 1-200A
£35.00 – £40.00Price range: £35.00 through £40.00 Exc. VAT Select options This product has multiple variants. The options may be chosen on the product pageThe CSW series of AC current switches activate a normally open (NO) contact closure via a solid-state switch whenever the monitored primary circuit current exceeds a pre-set level.
-
Current Bar/Power Bar EB
LoRa Wireless RS485 transmitter and receiver with LCD screen – 2 Units
£260.00Original price was: £260.00.£160.00Current price is: £160.00. Exc. VAT Add to cartThe LoRaWAN Data Transmission Terminal is a universal communication interactive equipment that is designed and manufactured based on LoRa RF chip.
It integrates two interfaces of industrial standard RS485 and supports a variety of protocols to realise the data transmission between wired and wireless devices.
It supports LoRaWAN Class C protocol. It can be widely applied in the IoT, centralised metering and industrial control etc. -
Current Bar/Power Bar EB
LoRa Wireless RS485 transmitter or receiver with LCD screen – 1 Unit
£150.00Original price was: £150.00.£80.00Current price is: £80.00. Exc. VAT Add to cartThe LoRaWAN Data Transmission Terminal is a universal communication interactive equipment that is designed and manufactured based on LoRa RF chip.
It integrates two interfaces of industrial standard RS485 and supports a variety of protocols to realise the data transmission between wired and wireless devices.
It supports LoRaWAN Class C protocol. It can be widely applied in the IoT, centralised metering and industrial control etc. -
Current Bar/Power Bar EB
EB-303 Current Bar
£210.00Original price was: £210.00.£205.00Current price is: £205.00. Exc. VAT Read moreThe EC is a current sensor for standard miniature circuit breakers (MCB). It is designed to fit any type of IEC standard MCB, Residual-Current Devices (RCD), and Residual-current Circuit Breakers with Overload protection (RCBO) capable of measuring devices up to 40A. The EC includes a current transformer (CT) with turn ratio of 1:1000 and a burden resistor of 10Ω. The EC does not interfere with or affect the function of the MCB.
-
Current Bar/Power Bar EB
EB-306 Current Bar
£265.00 Exc. VAT Read moreThe EC is a current sensor for standard miniature circuit breakers (MCB). It is designed to fit any type of IEC standard MCB, Residual-Current Devices (RCD), and Residual-current Circuit Breakers with Overload protection (RCBO) capable of measuring devices up to 40A. The EC includes a current transformer (CT) with turn ratio of 1:1000 and a burden resistor of 10Ω. The EC does not interfere with or affect the function of the MCB.
-
Current Bar/Power Bar EB
EB-312 Current Bar
£380.00 Exc. VAT Read moreThe EC is a current sensor for standard miniature circuit breakers (MCB). It is designed to fit any type of IEC standard MCB, Residual-Current Devices (RCD), and Residual-current Circuit Breakers with Overload protection (RCBO) capable of measuring devices up to 40A. The EC includes a current transformer (CT) with turn ratio of 1:1000 and a burden resistor of 10Ω. The EC does not interfere with or affect the function of the MCB.
-
Controllers
Adjustable Relay Module – NP-NRM-10
£46.15Original price was: £46.15.£40.00Current price is: £40.00. Exc. VAT Add to cartThe NRM-10 is a Digital, advanced in features, compact, and economical adjustable relay module. It takes 0-10VDC input and turns on/off relay at user-adjusted ON and OFF switch points.
-
Controllers
Multi Input Remote Alarm – CAD-AP
£110.00 Exc. VAT Add to cartA versatile Audible/Visual Alarm Point accepting a wide range of input triggers and selectable Audible Alarms.
-
Controllers
Fan Speed Controller 8 Amps Soft Start
£145.00 Exc. VAT Add to cartThe compact FSC-8 fan speed controller offers stepless speed regulation for single-phase AC motors.
-
Controllers
Set Point Adjuster 1-11K Ohms
£26.57 Exc. VAT Add to cartThe SP10K is ideal for control of devices that require a 1-11K Ohms resistive signal. This can be used for commissioning purposes or manual control.
-
Controllers
Fan Speed Controller
£141.00 – £150.00Price range: £141.00 through £150.00 Exc. VAT Select options This product has multiple variants. The options may be chosen on the product pageThe FSC-MMC is a miniature plug and play efficient triac controller for small and medium sized single phase motors.























