HVAC Products

ECP

  • Direct Insertion Sensors

    Direct Insertion Sensor for 25mm pipe

    Price range: £25.15 through £30.50 Select options This product has multiple variants. The options may be chosen on the product page

    Direct Insertion Sensors are designed for precise temperature measurement. Typically used in small pipework and do not require a pocket, which helps avoid dead legs.

  • Direct Insertion Sensors

    Direct Insertion Sensor for 20mm pipe

    Price range: £24.15 through £29.50 Select options This product has multiple variants. The options may be chosen on the product page

    Direct Insertion Sensors are designed for precise temperature measurement. Typically used in small pipework and do not require a pocket, which helps avoid dead legs.

  • Direct Insertion Sensors

    Direct Insertion Sensor for 15mm pipe

    Price range: £23.15 through £28.50 Select options This product has multiple variants. The options may be chosen on the product page

    Direct Insertion Sensors are designed for precise temperature measurement. Typically used in small pipework and do not require a pocket, which helps avoid dead legs.

  • Heat Meters

    Kamstrup Power Supply

    Price range: £30.00 through £36.00 Select options This product has multiple variants. The options may be chosen on the product page

    Kamstrup Power supply for Multical 403 or 603 heat meters

  • Heat Meters

    Kamstrup MULTICAL 403 HC-003-67 Modbus RTU

    £133.00 Add to cart

    The wired Modbus RTU communication module enables the Kamstrup Multical® 403 heat meter to connect to other on-site communication equipment, enabling automatic data reading from the meter. This module is equipped with two pulse inputs, In-A and In-B, to collect and accumulate pulses remotely from other water and electric meters.

  • Heat Meters

    Kamstrup MULTICAL 403 HC-003-66 BACnet MSTP

    £133.00 Add to cart

    The wired BACnet MSTP communication module enables the Kamstrup Multical® 403 heat meter to connect to other on-site communication equipment, enabling automatic data reading from the meter. This module is equipped with two pulse inputs, In-A and In-B, to collect and accumulate pulses remotely from other water and electric meters.

  • Heat Meters

    Kamstrup MULTICAL 403 Wired M-Bus Module

    £59.00 Add to cart

    The wired M-Bus communication module enables the Kamstrup Multical® 403 heat meter to connect to other on-site communication equipment, enabling automatic data reading from the meter. This module is equipped with two pulse inputs, In-A and In-B, to collect and accumulate pulses remotely from other water and electric meters.

  • Heat Meters

    Kamstrup MULTICAL 403 Wireless M-Bus Module

    £79.44 Add to cart

    The wireless M-Bus communication module enables the Kamstrup Multical® 403 heat meter to connect to other on-site communication equipment, enabling automatic data reading from the meter. This module is equipped with two pulse inputs, In-A and In-B, to collect and accumulate pulses remotely from other water and electric meters.

  • Heat Meters

    Kamstrup MULTICAL 403 Data Pulse Module

    £34.00 Add to cart

    The Data Pulse communication module enables the Kamstrup Multical® 403 heat meter to be hard-wired to other on-site communication equipment for automatic data reading from the meter. This module has two configurable pulse outputs, Out-C and Out-D, suitable for pulsing selected registers from the Multical® 403.

  • Heat Meters

    Multical 403 Compact ultrasonic energy meter

    Price range: £480.00 through £1,340.00 Select options This product has multiple variants. The options may be chosen on the product page

    Multical® 403 is a compact ultrasonic energy meter that includes a calculator, a flow sensor, a 1.5 m signal cable, and two 1.5 m return temperature sensors for water-based heating systems operating at temperatures from 2 to 130°C.

  • Controllers

    Fan speed controller – Carel FCSM122300 – Cut Phase 0-10V 12A/230VAC

    £163.00 Add to cart

    The single-phase FCS units are electronic voltage regulators that use phase control to regulate the output voltage delivered to the load in response to an input control signal.

  • Wireless Routers

    Teltonika RUT200 4G LTE Cat 4, 4G, 3G, 2G Industrial Router

    £127.00 Add to cart

    Teltonika RUT200 eSIM 4G LTE Cat 4G, 3G, 2G Industrial Router. RUT200 is a compact industrial cellular router that provides reliable, mission-critical connectivity in rugged conditions common in industries such as automation, transportation, and manufacturing. This model is equipped with 4G LTE, Wi-Fi, and two Ethernet ports, making it ideal for quickly setting up primary and backup connectivity and supporting remote management.

  • Controllers

    JACE 9000 With WiFi

    Price range: £2,703.00 through £10,964.00 Select options This product has multiple variants. The options may be chosen on the product page

    The JACE® 9000 controller with Wi-Fi is Tridium’s hardware platform optimised for Niagara 4*. This controller is a dramatic evolution in connecting and controlling devices worldwide, featuring a new global design that works with legacy systems and scales for future needs.

  • Controllers

    JACE 9000 None WiFi

    Price range: £2,607.00 through £10,868.00 Select options This product has multiple variants. The options may be chosen on the product page

    The JACE® 9000 controller is Tridium’s hardware platform optimised for Niagara 4*. This controller is a dramatic evolution in connecting and controlling devices worldwide, featuring a new global design that works with legacy systems and scales for future needs.

  • Controllers

    EDGE-10-E

    £331.20 Add to cart

    Niagara Edge 10 field controller with 10 points of onboard IO, 1 RS-485 serial port, and 2 10/100 Ethernet ports. Supports 1 IO-R-34. Includes Niagara N4 and drivers for BACnet, Modbus and SNMP. Supports up to 3 devices and 50 total points.

  • Air

    Air Differential Pressure Switch

    £17.00 Select options This product has multiple variants. The options may be chosen on the product page

    This 930 range of air differential pressure switches are suitable for low differential switching applications and are ideal for providing an indication of fan status or ‘filter dirty’ conditions.

Categories
Scroll to Top