Shop
-
Relay and IO Modules
10 channel alarm integrator module 24Vac/dc – IO-ALM10-24
£19.75 Exc. VAT Exc. VAT Add to cartThe IO-ALM10 series of Alarm Integrators monitor up to 10 Input Channels up to 24VAC/DC per channel and provide a relay output in the event of an alarm signal appearing on any one or more inputs.
The IO-ALM10 Alarm Integrators is self-powered from the alarm input and are designed for mounting on the TS35 (35mm Slotted Din Rail) section DIN rail. -
Relay and IO Modules
10Vdc Single Relay and Base – IOR1-10DC
£5.56 Exc. VAT Exc. VAT Add to cartThe IOR1 range of single relay modules is suitable for a wide range of voltages and is supplied complete with a DIN rail mounting base and retaining clip.
-
Relay and IO Modules
24Vac Single Relay and Base – IOR1-24AC
£6.18 Exc. VAT Exc. VAT Add to cartThe IOR1 range of single relay modules is suitable for a wide range of voltages and is supplied complete with a DIN rail mounting base and retaining clip.
-
Relay and IO Modules
230Vac Single Relay and Base- IOR1-230AC
£8.44 Exc. VAT Exc. VAT Add to cartThe IOR1 range of single relay modules is suitable for a wide range of voltages and is supplied complete with a DIN rail mounting base and retaining clip.
-
Relay and IO Modules
24Vdc Single Relay and Base – IOR1-24DC
£5.67 Exc. VAT Exc. VAT Add to cartThe IOR1 range of single relay modules is suitable for a wide range of voltages and is supplied complete with a DIN rail mounting base and retaining clip.
-
Relay and IO Modules
12Vac/dc 6mm Relay Module – RM1-6MM-12
£10.21 Exc. VAT Exc. VAT Add to cartThese relay modules are available in 3 voltages and are ideal when space is limited as they are only 6mm wide.
Fits 35mm Din rail -
Relay and IO Modules
24Vac/dc 6mm Relay Module – RM1-6MM-24
£7.98 Exc. VAT Exc. VAT Add to cartThese relay modules are available in 3 voltages and are ideal when space is limited as they are only 6mm wide.
Fits 35mm Din rail -
Relay and IO Modules
230Vac/dc 6mm Relay Module – RM1-6MM-230
£11.34 Exc. VAT Exc. VAT Add to cartThese relay modules are available in 3 voltages and are ideal when space is limited as they are only 6mm wide.
Fits 35mm Din rail -
Relay and IO Modules
Adjustable Single Relay Module – IOVR1
£27.35 Exc. VAT Exc. VAT Add to cartThe IOVRI is an SPCO change over relay output from 0 to 10Vdc with a fully adjustable switch point.
-
Relay and IO Modules
Analogue Rescaling Module – ARM
£89.25 Exc. VAT Exc. VAT Add to cartThe IOVRI is an SPCO change over relay output from 0 to 10Vdc with a fully adjustable switch point.
-
Relay and IO Modules
Analogue to 20 Relay Card – IOAD20
£128.00 Exc. VAT Exc. VAT Add to cartThe IOAD20 has been designed primarily for fault indication of up to 20 alarms from 1 analogue signal.
-
Relay and IO Modules
Current Monitoring Relay – CMR5-VFC
£23.50 Exc. VAT Exc. VAT Add to cartThe Current Monitoring Relay is designed to monitor Current to equipment and can be set to switch the volt free contact at a set current, also there is an adjustable time delay to eliminate current peaks.
-
Relay and IO Modules
Dual Phase Cut Module 30VA per channel – IOPC2
£76.00 Exc. VAT Exc. VAT Add to cartThe IOPC2 converts two 0-10V dc Input Signals to drive two separate 0-20V 50Hz phase-cut outputs, at 30VA per channel for the control of small valve or damper actuators.
-
Relay and IO Modules
Eight Stage Relay Module – IOR8
£70.00 Exc. VAT Exc. VAT Add to cartThis IO module is used with DDCs to convert an analogue control output to a staged, reverse staged, or sequenced relay output.
-
Relay and IO Modules
Electro-pneumatic Converter – IOEPC
£152.00 Exc. VAT Exc. VAT Add to cartThe IOEPC is an electric to pneumatic transducer which converts an analogue input signal to a proportional pneumatic output.
-
Relay and IO Modules
Four Channel Override Relay Module – IO RM04
£82.00 Exc. VAT Exc. VAT Add to cartThe IOMR4 is designed for applications that require an independent manual override of digital output channels from BMS Controllers.
