Shop
-
Smoke Detection
Smoke Detector Sampling Tube
£75.00 Exc. VAT Add to cartThe SD-2000-P (Photoelectric) Series Smoke Duct Detector is the latest innovation for early detection of smoke and combustion products in air moving through HVAC ducts in Commercial, Industrial, and Residential applications. The unit is designed to prevent the recirculation or spread of smoke by air handling systems, fans, and blowers. Complete systems may be shut down in the event of smoke detection. The SD-2000 is designed and built to meet all local code requirements regarding HVAC supply and return duct smoke detectors. Output terminals are provided for a wide range of remote accessories such as horns, strobes, remote status indicators, and test/reset key switches or push buttons.
-
Smoke Detection
Duct Smoke Detector Housing with Photoelectric Sensor
£380.00 Exc. VAT Add to cartThe SD-2000-P (Photoelectric) Series Smoke Duct Detector is the latest innovation for early detection of smoke and combustion products in air moving through HVAC ducts in Commercial, Industrial, and Residential applications. The unit is designed to prevent the recirculation or spread of smoke by air handling systems, fans, and blowers. Complete systems may be shut down in the event of smoke detection. The SD-2000 is designed and built to meet all local code requirements regarding HVAC supply and return duct smoke detectors. Output terminals are provided for a wide range of remote accessories such as horns, strobes, remote status indicators, and test/reset key switches or push buttons.
-
Gas Sensors
Space Carbon Dioxide & Temperature Sensor 0-10V Output
£313.95 Exc. VAT Add to cartThe self-calibrating microprocessor-controlled space air-quality sensor uses a mixed-gas sensor and a VOC sensor to determine air quality.It is used to measure air quality and to quantify room air pollution caused by contaminating gases. The air quality sensor does not trace concentrations of individual gases, but assesses the mixed gas concentration. Detectable gases: mixed gas, vapours of VOCs, cigarette smoke, automobile exhaust gases, human exhalation, combustion smoke (from wood, paper, plastics). The sensor‘s lifetime depends on the type of burden and gas concentration.
-
Gas Sensors
Space Mounting Carbon Dioxide Sensor with 0/10Vdc Output
£280.88 Exc. VAT Add to cartThe self-calibrating microprocessor-controlled space air-quality sensor uses a mixed-gas sensor and a VOC sensor to determine air quality.It is used to measure air quality and to quantify room air pollution caused by contaminating gases. The air quality sensor does not trace concentrations of individual gases, but assesses the mixed gas concentration. Detectable gases: mixed gas, vapours of VOCs, cigarette smoke, automobile exhaust gases, human exhalation, combustion smoke (from wood, paper, plastics). The sensor‘s lifetime depends on the type of burden and gas concentration.
-
Gas Sensors
Space Mounting Air Quality Sensor, Selectable Output 0/10Vdc or 4-20mA
£224.00 Exc. VAT Add to cartThe self-calibrating microprocessor-controlled space air-quality sensor uses a mixed-gas sensor and a VOC sensor to determine air quality.It is used to measure air quality and to quantify room air pollution caused by contaminating gases. The air quality sensor does not trace concentrations of individual gases, but assesses the mixed gas concentration. Detectable gases: mixed gas, vapours of VOCs, cigarette smoke, automobile exhaust gases, human exhalation, combustion smoke (from wood, paper, plastics). The sensor‘s lifetime depends on the type of burden and gas concentration.
-
Gas Sensors
Duct Mounting Carbon Dioxide Sensor with 0/10Vdc Output
£283.50 Exc. VAT Add to cartThe self-calibrating microprocessor-controlled duct air-quality sensor is used to determine air quality based on a mixed-gas sensor/VOC sensor. It is used to measure air quality and to quantify room air pollution caused by contaminating gases. The air quality sensor does not trace concentrations of individual gases, but assesses the mixed gas concentration. Detectable gases: mixed gas, vapours of VOCs, cigarette smoke, automobile exhaust gases, human exhalation, combustion smoke (from wood, paper, plastics).
-
Gas Sensors
Duct Mounting Air Quality Sensor, Selectable Output 0/10Vdc or 4-20mA
£324.00 Exc. VAT Add to cartThe self-calibrating microprocessor-controlled duct air-quality sensor is used to determine air quality based on a mixed-gas sensor/VOC sensor. It is used to measure air quality and to quantify room air pollution caused by contaminating gases. The air quality sensor does not trace concentrations of individual gases, but assesses the mixed gas concentration. Detectable gases: mixed gas, vapours of VOCs, cigarette smoke, automobile exhaust gases, human exhalation, combustion smoke (from wood, paper, plastics).
-
Gas Sensors
CO Detector, Modbus
£338.00 Exc. VAT Add to cartThe CMD Series carbon Monoxide detector uses an electrochemical sensor to monitor the Carbon Monoxide level and outputs a 4-20mA signal. The standard product features a 2-wire loop-powered output. Optionally, the device may be configured with an alarm relay and operate in 3-wire sourcing mode. Optional Modbus communications output is available.
-
Gas Sensors
Carbon Monoxide Sensor CO Loop Powered 4-20mA
£275.00 Exc. VAT Add to cartThe CMD Series carbon Monoxide detector uses an electrochemical sensor to monitor the Carbon Monoxide level and outputs a 4-20mA signal. The standard product features a 2-wire loop-powered output. Optionally, the device may be configured with an alarm relay and operate in 3-wire sourcing mode. Optional Modbus communications output is available.
-
Gas Sensors
Carbon Monoxide Sensor CO 4-20mA 3 Wire Relay Output
£280.00 Exc. VAT Add to cartThe CMD Series carbon Monoxide detector uses an electrochemical sensor to monitor the Carbon Monoxide level and outputs a 4-20mA signal. The standard product features a 2-wire loop-powered output. Optionally, the device may be configured with an alarm relay and operate in 3-wire sourcing mode. Optional Modbus communications output is available.
-
Gas Sensors
Transmitter – CO2, Temp & RH
£215.00 Exc. VAT Add to cartThe Transmitter range can be supplied with any combination of Carbon Dioxide (CO2), Temperature and Relative Humidity. With three 0-10V outputs, an onboard relay, and the ability to select between Analogue and Thermistor temperature outputs, our transmitter range is one of the most versatile units available.
-
Gas Sensors
Transmitter – CO2 & Temp c/w LCD
£200.00 Exc. VAT Add to cartThe Transmitter range can be supplied with any combination of Carbon Dioxide (CO2), Temperature and Relative Humidity. With three 0-10V outputs, an onboard relay, and the ability to select between Analogue and Thermistor temperature outputs, our transmitter range is one of the most versatile units available.
-
Gas Sensors
Transmitter – CO2 & Temp & RH c/w LCD
£225.00 Exc. VAT Add to cartThe Transmitter range can be supplied with any combination of Carbon Dioxide (CO2), Temperature and Relative Humidity. With three 0-10V outputs, an onboard relay, and the ability to select between Analogue and Thermistor temperature outputs, our transmitter range is one of the most versatile units available.
-
Gas Sensors
Transmitter – CO2 & Temp
£195.00 Exc. VAT Add to cartThe Transmitter range can be supplied with any combination of Carbon Dioxide (CO2), Temperature and Relative Humidity. With three 0-10V outputs, an onboard relay, and the ability to select between Analogue and Thermistor temperature outputs, our transmitter range is one of the most versatile units available.
-
Gas Sensors
Methane (CH4) Sensor
£270.00 Exc. VAT Add to cartThe FGS Gas Sensor is one of the most cost-effective and versatile units available on the market. With a Voltage Output and Volt-Free Contact, the FGS can connect directly to most third-party controllers or easily to the new LCD-based range of panels via the BACnet output.
-
Gas Sensors
LPG Sensor
£270.00 Exc. VAT Add to cartThe FGS Gas Sensor is one of the most cost-effective and versatile units available on the market. With a Voltage Output and Volt-Free Contact, the FGS can connect directly to most third-party controllers or easily to the new LCD-based range of panels via the BACnet output.
%20Sensor&url=https://hvacproducts.co.uk/product/methane-ch4-sensor/&media=https://hvacproducts.co.uk/wp-content/uploads/2025/12/GS-FGS-scaled-1-736x1024.webp){kind=link}
