ECP
-
FCU Controllers
Volt Free To Voltage Converter – IOFS24-10
£35.00 Add to cartThe IOFS24-10 has been designed to provide 3 DC voltages from voltage-free inputs. The inputs can be adjusted to 0-10 volts. This module can be used for switched fan speed control where a 0-10 volt signal is needed, but only 3 speeds are needed.
-
Air
Voltage to Current Conversion Module – IO-VI
£43.00 Add to cartThe IO-VI is designed to convert a 0-10Vdc input signal to a 4-20mA current output. The IO-VI is supplied in a DIN Rail carrier suitable for mounting on a TS35 DIN Rail section and features high-quality rising clamp terminals for ease of connection. The unit is powered by 24 Vac/dc and can power a current-loop signal.
-
Liquid
Liquid Differential Pressure Sensor 0/10Vdc
£340.00 Select options This product has multiple variants. The options may be chosen on the product pageThe 482 range of Liquid DP sensors use a piezo-resistive sensor and incorporate zero and span adjustment.
They are ideal for use in areas requiring exact pressure measurement, low hysteresis and long-term stability in all applications where air, oil or water is to be monitored. -
Liquid
Liquid Differential Pressure Sensor 4-20mA
£340.00 Select options This product has multiple variants. The options may be chosen on the product pageThe 482 range of Liquid DP sensors use a piezo-resistive sensor and incorporate zero and span adjustment.
They are ideal for use in areas requiring exact pressure measurement, low hysteresis and long-term stability in all applications where air, oil or water is to be monitored. -
Liquid
Liquid Static Pressure Sensor 4-20mA
£136.00 Select options This product has multiple variants. The options may be chosen on the product pageThe PT603 range of Liquid Pressure sensors uses a piezo-resistive sensor and incorporates an IP65 connector for wiring with a ¼” BSP threaded connection.
-
Liquid
Liquid Differential Pressure Switch LDP
£116.00 Select options This product has multiple variants. The options may be chosen on the product pageThe series LDP is a differential pressure switch that makes a contact output based on the differential between two pressure sources.
Wetted materials of brass and fluoroelastomer are suitable for use with most gases and water-based solutions. -
Liquid
Connection kit for use with the FD113
£29.00 Add to cartBrass Fitting 1/4″ bspt to 6mm Compression
Copper Tube 6mm OD -
Liquid
Liquid Differential Pressure Switch 0.3-4.5 bar – FD113
£90.80 Add to cartThe FD113 is a differential pressure switch that is used for monitoring flow status across pumps, chillers, etc. The unit has an adjustable setpoint with scale and ¼” BSP female pipe connections.
-
Liquid
Liquid Pressure Switch -0.5-7 bar
£41.00 Add to cartThe PS1 is a cost-effective pressure switch suitable for monitoring pumps, chillers, valves, etc. The unit has an adjustable setpoint with adjustable differential and has a gauge to show the liquid pressure.
-
Air
Plastic Elbow Piece
£1.60 Add to cartElbow for air DP sensor tube – Dimensions 3/16″ (5mm) diameter Blue Tefen
-
Air
Plastic Tee piece
£2.00 Add to cartPlastic tee pieces suitable for use with our range of Air Differential Pressure Switches and Sensors. 3/16 of an inch (5mm) diameter, 50.97mm long, and 30.68 mm wide. Blue Tefen.
-
Air
Right Angle Mounting Bracket for PA1 or 930 Switches
£2.85 Add to cartRight Angle Mounting Bracket for PA1 or 930 Switches
-
Air
30 metre reel of PVC tubing
£30.00 Add to cartPVC tubing is suitable for use with our range of air pressure products.
-
Air
Room Pressure Nipple
£18.00 Add to cartThe Room Pressure Nipple is designed to use with a suitable air pressure sensor such as our PTH3202 for monitoring room pressure where perhaps a positive pressure is required, for example operating theatres and clean rooms.
