Shop
-
Relay and IO Modules
Six Channel Digital Input Multiplexer (Current) – IODIM6-MI-I
£72.45 Add to basketThe IODIM6-MI multiplexes 6 VFC or 24 Vac/dc signals into a single analogue output.
0-10Vdc, 2-10Vdc, 4-20mA, and 0-20mA output variants are available, making the unit compatible with a wide range of BMS equipment. -
Relay and IO Modules
Six Channel Digital Input Multiplexer (Voltage) – IODIM6-MI-V
£72.45 Add to basketSix Channel Digital Input Multiplexer (Voltage) – IODIM6-MI-V
-
Alarm Modules & Buzzers
10 channel alarm integrator module 230Vac – IO-ALM10-230
£25.00 Add to basketThe IO-ALM10 series of Alarm Integrators monitors up to 10 Input Channels, each up to 240VAC, and provides a relay output in the event of an alarm signal on any one or more inputs. The IO-ALM10 Alarm Integrators are self-powered from the alarm input and are designed for mounting on the TS35 (35mm Slotted DIN Rail) section of the DIN rail.
-
Alarm Modules & Buzzers
10 channel alarm integrator module 24Vac/dc – IO-ALM10-24
£25.00 Add to basketThe IO-ALM10 Alarm Integrators are self-powered from the alarm input and are designed for mounting on the TS35 (35mm Slotted DIN Rail) section of the DIN rail.
-
Relay 24Vac Coil
24Vac Single Relay and Base – IOR1-24AC
£8.00 Add to basketThe IOR1 range of single relay modules is suitable for a wide range of voltages and is supplied complete with a DIN rail mounting base and retaining clip.
-
Relay 12Vdc Coil
12Vdc 6mm Relay Module – RM1-6MM-12
£10.21 Add to basketThese Durakool Slimline Relays & Bases modules are available in 3 voltages and are ideal when space is limited, as they are only 6mm wide. Fits 35mm Din rail.
-
Relay 24Vac Coil
24Vac/dc 6mm Relay Module – RM1-6MM-24
£12.50 Add to basketThese Durakool Slimline Relays & Bases modules are available in 3 voltages and are ideal when space is limited, as they are only 6mm wide. Fits 35mm Din rail.
-
Relay 230Vac Coil
230Vac 6mm Relay Module – RM1-6MM-230
£11.91 Add to basketExplore our Feature Collection, featuring the most reliable, high-performance HVAC parts trusted by professionals. These Durakool Slimline Relay & Base modules are available in 3 voltages and are ideal when space is limited, as they are only 6mm wide. Fits 35mm Din rail.
-
Relay and IO Modules
Adjustable Single Relay Module – IOVR1
£27.35 Add to basketThe IOVRI is an SPCO change-over relay output from 0 to 10Vdc with a fully adjustable switch point. The unit also has a buffered 0-10Vdc output, which will allow one 0-10V input to be passed on to another device.
-
Relay and IO Modules
Analogue Rescaling Module – ARM
£125.00 Add to basketThe ARM analogue re-scaling module accepts voltage or current inputs and rescales them to voltage or current outputs. A range of preset values is link-selectable, and fine adjustments can be made using trim potentiometers.
-
Relay and IO Modules
Analogue to 20 Relay Card – IOAD20
£135.00 Add to basketThe IOAD20 has been designed primarily for fault indication of up to 20 alarms from 1 analogue signal. It provides 20-volt free-changeover contacts and 1 common-output contact.
-
Relay and IO Modules
Current Monitoring Relay – CMR5-VFC
£23.50 Add to basketThe Current Monitoring Relay is designed to monitor Current to equipment and can be set to switch the voltage-free contact at a set current. There is an adjustable time delay to eliminate current peaks. It can also be used with a current transformer to monitor higher currents. It has an LED indicator and is Din-rail mounting.
-
Relay and IO Modules
Dual Phase Cut Module 30VA per channel – IOPC2
£92.00 Add to basketThe IOPC2 converts two 0-10V DC input signals to drive two separate 0-20V 50Hz phase-cut outputs, at 30VA per channel, for the control of small valve or damper actuators. The IOPC2 features an optoisolator that is powered from 24V ac (with a common connection to the input signal) and has Rising Clamp Screw Terminals. The output from the IOPC2 can be boosted to 60VA by using two IOPCA1, 1 per channel.
-
Relay and IO Modules
Eight Stage Relay Module – IOR8
£70.00 Read moreThe IO-RM8 is intended for use with BMS controllers to convert an analogue control output to staged or sequenced relay modes.
LEDs indicate correct operation, and Hand/Off/Auto jumpers ease commissioning. -
Relay and IO Modules
Electro-pneumatic Converter – IOEPC
£250.00 Add to basketThe IOEPC is an electric-to-pneumatic transducer which converts an analogue input signal to a proportional pneumatic output. The unit will automatically modulate its control valve to regulate the branch-line pressure to the selected set point, as determined by the input signal.
-
Relay and IO Modules
Four Channel Override Relay Module – IORM04
£95.00 Add to basketFour Channel Override Relay Module – IO RM04
