S40MJC- 40mm WRAS Cold Water Meter c/w Pulse, Qp 16

40 mm nominal bore, 1.1/2″ BSP TM thread.
Pulsed water meter for monitoring consumption, usually linked to an energy monitoring system. Cast copper alloy meter body with multi-jet and vane-wheel operation. Fitted with an inductive interface and an electronic pulse emitter module with a 1.5 m lead.
Approved according to MID standards up to R100-H and R50-VH.

Qp = permanent (nominal) flow rate
16 m³/h = 16,000 litres per hour ≈ 266.7 litres per minute ≈ 4.44 litres/second

For example, a meter marked Qp 16 is typically intended to measure accurately around a continuous flow of 16 m³/h, although it can usually handle a higher flow for shorter periods.

Benefits

• 40 mm nominal bore with 1 1/2″ BSP TM thread for precise measurement
• Constructed from durable cast copper alloy for longevity
• Multi-jet and vane wheel operation for accurate readings
• Inductive interface and electronic pulse emitter with Mbus compatibility
• Approved to MID standards up to R100-H and R50-VH
• Maximum flow rate of 16 m³/h and pressure rating of 16 bar
• 1 pulse per 10 litres for precise monitoring
• WRAS approved for safety and compliance
• Maximum cold water temperature of 50°C for versatility in usage

Water Meter Pulsed DATASHEET

You can find a spare Reed Switch Pulse unit at Screwed Spare Pulse – Cold.